This item is in stock
Usually ships today if ordered by 3pm EST
Connects the PTZ communication cable to the PC by providing a RS485 Input interface from the cameras and a Serial-To-USB connection to the PC. Operates with all PTZ cameras and EZWatch software Version 4.0 and newer. Only one unit need for support of 16 PTZ cameras. ***Version 4.0 & Newer***
PTZ cameras are programmed and controlled with either a joystick controller or software built into a DVR. The cameras are connected together with a two wire communication cable which is pulled from one camera to another creating a "Daisy Chain" of cameras with a maximum cable distance of 3000 feet.
Each camera is given an address so the system can control each camera independently. This is accomplished by setting dip switches on the came
This kit is perfect for the initial setup and use of EZ-Track PTZ Dome Cameras.
Up to 16 EZ-Track Domes are programmed and controlled with this interface. The cameras are connected together with a two wire communication cable which is pulled from one camera to another creating a “Daisy Chain” of cameras with a maximum cable distance of 3000 feet. Recommended communication wire Item #1000/22-2.
The two wire communication cable is connected to the RS485 two wire input connection on the TRP-C08 interface module. The module is then connected to the PC with a Serial cable. A USB adapter is available in cases where a serial connection is not present. Version 4.0 software then provides complete control and support of up to 16 PTZ cameras.
PTZ cameras are programmed and controlled with either a joystick controller or software built into a DVR. The cameras are connected together with a two wire communication cable which is pulled from one camera to another creating a "Daisy Chain" of cameras with a maximum cable distance of 3000 feet.
Each camera is given an address so the system can control each camera independently. This is accomplished by setting dip switches on the camera to correspond to a specific camera number. Camera 1, Camera 2, Camera 3 Camera 4 etc.
The two wire communication cable is then connected to either a joystick controller and/or PC interface. The cameras can be controlled simultaneously with the joystick and the DVR software. Both units perform the same control functions with the exception that the joystick controller is needed for initial setup. Using the DVR software interface you can access the system remotely through the internet or a company's network and control the cameras remotely.
At first glance a Pan, Tilt, Zoom system may look a little challenging. But at a closer look you'll find this is not the case. The parts of the system easily connect and the layout is quite simple and flexible.
You have several options for controlling the camera. You can use the TRP-CO8 PC interface which will allow you to control the camera through the EZWatch Pro software. Or you can choose one of our easy to use joystick controllers, the AU40E or the AU40Z. Only one unit is required to control up to 16 cameras.
The cameras are controlled with a two wire communication line pulled from one camera to the other. Up to 16 cameras can be linked together with this "com. line". The total maximum distance of the com. line is 3000 feet. Any combination of the different PTZ cameras we offer can be controlled on this one "com. line" or wire run.
At first glance a Pan, Tilt, Zoom system may look a little challenging. But at a closer look you'll find this is not the case. The parts of the system easily connect and the layout is quite simple and flexible.
You have several options for controlling the camera. You can use the TRP-CO8 PC interface which will allow you to control the camera through the EZWatch Pro software. Or you can choose one of our easy to use joystick controllers, the AU40E or the AU40Z. Only one unit is required to control up to 16 cameras.
The cameras are controlled with a two wire communication line pulled from one camera to the other. Up to 16 cameras can be linked together with this "com. line". The total maximum distance of the com. line is 3000 feet. Any combination of the different PTZ cameras we offer can be controlled on this one "com. line" or wire run.
Estimated Time To Ship | Usually ships today if ordered by 3pm EST |
---|
All surveillance cameras and complete video surveillance kits manufactured by EZWatch are covered by a 3-year limited warranty with the exception of spy cameras, hidden cameras, and IP cameras. These three categories are covered by a 1-year limited warranty. All-in one spy and nanny camera products with built-in DVRs are provided with a 30-day warranty. Products manufactured by 3rd party sources such as Honeywell, Sony and American Dynamics are subject to the terms and conditions of the manufacturer's warranty.
During the warranty period if your equipment is deemed to be defective due to a manufacturing defect and you are issued an RMA (Return Material Authorization) from our technical support department, we will repair or replace the product. During the 1st 30 days, we will pay for shipping to and from your location on any warranty items. After 30 days, the cost for shipping the product back to EZWatch is the responsibility of the customer.